LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH INSTALLATION

PROCEDURE


  1. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH (for Type B)


    1. Engage the 4 guides and 4 claws.

    2. Install the No. 2 luggage compartment door outside garnish with the 2 screws.

  2. INSTALL NO. 2 BACK DOOR GARNISH RETAINER (for Type B)


    1. w/o Rear View Monitor System:


      1. Engage the 2 claws to install the No. 2 back door garnish retainer.

  3. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH PROTECTOR


    1. Clean the luggage compartment door outside garnish.


      1. Remove any remaining double-sided tape from the luggage compartment door outside garnish.

      2. Wipe off any tape adhesive residue with cleaner.

    2. Remove the release paper from a new luggage compartment door outside garnish protector.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. Install the luggage compartment door outside garnish protector as shown in the illustration.

      A01TCI1E01
      Standard Measurement
      Area Measurement Area Measurement
      A 4.5 to 5.5 mm (0.177 to 0.217 in.) B 3.0 to 9.0 mm (0.118 to 0.354 in.)

  4. INSTALL LUGGAGE COMPARTMENT DOOR OPENING SWITCH ASSEMBLY


    1. Install the luggage compartment door opening switch assembly.

  5. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY


    1. w/ Gasket:


      1. Install 5 new gaskets to the luggage compartment door outside garnish sub-assembly.

    2. Install a new clip to the luggage compartment door outside garnish sub-assembly.

    3. Engage the clip.

    4. Install the luggage compartment door outside garnish sub-assembly with the 5 nuts.

    5. Connect the connector.

  6. INSTALL REAR LIGHT ASSEMBLY LH

    Click here

  7. INSTALL REAR LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.