FRONT DOOR BELT MOULDING INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL FRONT DOOR BELT MOULDING ASSEMBLY


    1. Resin Type:


      1. A01M32V

        Engage the 6 claws to install the front door belt moulding assembly.

    2. Plating Type:


      1. A01LWCU

        Engage the 5 claws to install the front door belt moulding assembly.

  2. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY

    for Hatchback, Wagon: Click here

    for Sedan: Click here

  3. INSTALL FRONT DOOR SERVICE HOLE COVER

    for Hatchback, Wagon: Click here

    for Sedan: Click here

  4. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY WITH COVER

    Click here

  5. INITIALIZE POWER WINDOW CONTROL SYSTEM


    • for Models with Jam Protection Function on 4 Windows: Click here


    • for Models with Jam Protection Function on Driver Door Window Only: Click here

  6. INSPECT POWER WINDOW OPERATION


    • for Models with Jam Protection Function on 4 Windows: Click here


    • for Models with Jam Protection Function on Driver Door Window Only: Click here