NAME PLATE(for Hatchback) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

When installing the name plates or emblem, heat the vehicle body and name plates or emblem using a heat light.

Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Name Plate or Emblem 20 to 30°C (68 to 86°F)

Note

Do not heat the vehicle body, name plates or emblem excessively.

PROCEDURE


  1. INSTALL NO. 1 BACK DOOR EMBLEM


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Clean off any tape adhesive residue with cleaner.

    2. Install a new No. 1 back door emblem.


      1. Using a heat light, heat the vehicle body and No. 1 back door emblem.

      2. Remove the release paper from the No. 1 back door emblem.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Engage the 2 pins and install the No. 1 back door emblem.

        A01D4N7C01
        *a Location pin - -

  2. INSTALL BACK DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Clean off any tape adhesive residue with cleaner.

    2. Install a new back door name plate.


      1. Using a heat light, heat the vehicle body and back door name plate.

      2. Remove the release paper from the back door name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the back door name plate as shown in the illustration.

        A01D65LC01
        *a Profile of back door panel - -
        Reference Measurement
        Area Measurement
        A 51.4 mm (2.02 in.)
        B 45.8 mm (1.80 in.)
        C 157.3 mm (6.19 in.)
        D 66.8 mm (2.63 in.)

  3. INSTALL NO. 2 BACK DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Clean off any tape adhesive residue with cleaner.

    2. Install a new No. 2 back door name plate.


      1. Using a heat light, heat the vehicle body and No. 2 back door name plate.

      2. Remove the release paper from the No. 2 back door name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 2 back door name plate as shown in the illustration.

        A01D3WJC01
        *a Profile of back door panel - -
        Reference Measurement
        Area Measurement
        A 68.3 mm (2.69 in.)
        B 191.2 mm (7.53 in.)
        C 48.3 mm (1.90 in.)
        D 39.1 mm (1.54 in.)