FRONT DOOR WINDOW FRAME MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE FRONT DOOR BELT MOULDING ASSEMBLY

    Click here

  2. DISCONNECT FRONT DOOR WEATHERSTRIP


    1. for Hatchback, Wagon:


      1. A012GL8

        Disengage the 2 clips and disconnect the front door weatherstrip.

    2. for Sedan:


      1. A012F9E

        Disengage the clip and disconnect the front door weatherstrip.

  3. REMOVE FRONT DOOR REAR WINDOW FRAME MOULDING

    Tech Tips

    When removing the front door rear window frame moulding, heat the vehicle body and front door rear window frame moulding using a heat light.

    Heating Temperature
    Item Temperature
    Vehicle Body 40 to 60°C (104 to 140°F)
    Front Door Rear Window Frame Moulding 20 to 30°C (68 to 86°F)

    Note

    Do not heat the vehicle body or moulding excessively.


    1. Using a heat light, heat the front door rear window frame moulding.

    2. A012FZDC03
      A012F6O Double-sided Tape

      Using a moulding remover, disengage the clip and guide, and peel off the double-sided tape to remove the front door rear window frame moulding.