REAR BUMPER(for Wagon) REMOVAL

PROCEDURE


  1. REMOVE REAR QUARTER PANEL MUDGUARD LH (w/ Mudguard)

    Click here

  2. REMOVE REAR QUARTER PANEL MUDGUARD RH (w/ Mudguard)

    Tech Tips

    Use the same procedure as for the LH side.

  3. REMOVE REAR BUMPER ASSEMBLY


    1. A01LVQ0C01
      A01M1XR Protective Tape

      Apply protective tape around the rear bumper assembly as shown in the illustration.

    2. A01LV62

      Remove the 2 screws.

    3. A01LVWJ

      Remove the 2 screws and 2 clips.

    4. A01M1M5

      Using a clip remover, remove the 7 clips.

    5. A01M1HK

      Using a clip remover, remove the clip.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. A01LYSR

      Disengage the 7 claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    7. A01M22M

      Disengage the 4 claws as shown in the illustration.

    8. w/ TOYOTA Parking Assist-sensor System:


      1. Disconnect the connector.

    9. Remove the rear bumper assembly.