REAR BUMPER(for Wagon) REMOVAL

PROCEDURE


  1. REMOVE REAR QUARTER PANEL MUDGUARD LH (w/ Mudguard)

    Click here

  2. REMOVE REAR QUARTER PANEL MUDGUARD RH (w/ Mudguard)

    Tech Tips

    Use the same procedure as for the LH side.

  3. REMOVE REAR BUMPER ASSEMBLY


    1. A012FULC01
      A012F6O Protective Tape

      Put protective tape around the rear bumper assembly.

    2. A012JAF

      Remove the 2 screws.

    3. A012FJS

      Remove the 2 screws and 2 clips.

    4. A012MPO

      Using a clip remover, remove the 7 clips.

    5. A012I4V

      Using a clip remover, remove the clip.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. A012F95

      Disengage the 7 claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    7. A012JPX

      Disengage the 4 claws as shown in the illustration.

    8. w/ TOYOTA Parking Assist-sensor System:


      1. Disconnect the connector.

    9. Remove the rear bumper assembly.