REAR BUMPER(for Sedan) DISASSEMBLY

PROCEDURE


  1. REMOVE NO. 3 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

    Click here

  2. REMOVE ULTRASONIC SENSOR CLIP (w/ TOYOTA Parking Assist-sensor System)

    Click here

  3. REMOVE NO. 3 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

    Click here

  4. REMOVE NO. 2 LUGGAGE ROOM WIRE (w/ TOYOTA Parking Assist-sensor System)


    1. Disconnect the 4 connectors.

      A01D3QV
    2. Disengage the 4 clamps to remove the No. 2 luggage room wire.

  5. REMOVE REAR BUMPER PAD


    1. A01D6HF

      Remove the rear bumper pad.

  6. REMOVE REFLEX REFLECTOR ASSEMBLY LH


    1. A01D4GO

      Remove the screw.

    2. Disengage the claw to remove the reflex reflector assembly LH.

  7. REMOVE REFLEX REFLECTOR ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  8. REMOVE REAR BUMPER SIDE RETAINER LH


    1. A01D3O4

      Remove the 2 screws.

    2. Disengage the 4 claws to remove the rear bumper side retainer LH.

  9. REMOVE REAR BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure as for the LH side.

  10. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH

    Click here

  11. REMOVE REAR COMBINATION LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  12. REMOVE REAR BUMPER UPPER RETAINER LH


    1. A01D4V4

      Remove the screw and rear bumper upper retainer LH.

  13. REMOVE REAR BUMPER UPPER RETAINER RH

    Tech Tips

    Use the same procedure as for the LH side.

  14. REMOVE REAR BUMPER SIDE SEAL LH


    1. A01D4L9

      Remove the 3 clips and rear bumper side seal LH.

  15. REMOVE REAR BUMPER SIDE SEAL RH


    1. A01D635

      Remove the 3 clips and rear bumper side seal RH.

  16. REMOVE NO. 1 REAR BUMPER REINFORCEMENT


    1. A01D6H1

      Remove the 8 bolts and No. 1 rear bumper reinforcement.

  17. REMOVE REAR BUMPER ARM SUB-ASSEMBLY LH


    1. A01D5LO

      Remove the 3 bolts and rear bumper arm sub-assembly LH.

  18. REMOVE REAR BUMPER ARM SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.