FRONT BUMPER(for Sedan) DISASSEMBLY

PROCEDURE


  1. REMOVE HEADLIGHT CLEANER WASHER NOZZLE COVER LH (w/ Headlight Cleaner System)

    Click here

  2. REMOVE HEADLIGHT CLEANER WASHER NOZZLE COVER RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure as for the LH side.

  3. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)

    Click here

  4. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure as for the LH side.

  5. REMOVE NO. 2 HEADLIGHT CLEANER CLAMP (w/ Headlight Cleaner System)

    Click here

  6. REMOVE NO. 1 HEADLIGHT CLEANER CLAMP (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure for the No. 2 headlight cleaner clamp.

  7. REMOVE HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)


    1. Disengage the 6 clamps to remove the headlight cleaner hose.

      A01TBWI

  8. REMOVE FRONT CENTER ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

    Click here

  9. REMOVE FRONT CORNER ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

    Click here

  10. REMOVE FRONT SIDE ULTRASONIC SENSOR (w/ Simple Intelligent Parking Assist System)

    Click here

  11. REMOVE FRONT CENTER ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

    Click here

  12. REMOVE FRONT CORNER ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

    Click here

  13. REMOVE FRONT SIDE ULTRASONIC SENSOR RETAINER (w/ Simple Intelligent Parking Assist System)

    Click here

  14. REMOVE NO. 5 ENGINE ROOM WIRE (w/ TOYOTA Parking Assist-sensor System)


    1. Disengage each clamp to remove the No. 5 engine room wire.

      A01T9HBC01
      *a w/ Simple Intelligent Parking Assist System - -

  15. REMOVE FRONT FENDER LINER RETAINER


    1. A01TBU1

      Disengage the claw to remove the front fender liner retainer.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  16. REMOVE FRONT BUMPER HOLE COVER


    1. A01T9S9C01
      *a Hook

      Disengage the 2 claws.

    2. Disengage the hook to remove the front bumper hole cover.

  17. REMOVE LOWER NO. 1 RADIATOR GRILLE


    1. A01TA1C

      Remove the 2 screws.

    2. A01TA5U

      Disengage the 17 claws and 4 guides to remove the lower No. 1 radiator grille.

  18. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)

    Click here

  19. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)

    Tech Tips

    Use the same procedure as for the LH side.

  20. REMOVE FOG LIGHT COVER LH


    1. A01T9SB

      Remove the 2 screws.

    2. A01TATB

      Disengage the 8 claws and 2 guides to remove the fog light cover LH.

  21. REMOVE FOG LIGHT COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  22. REMOVE FRONT BUMPER SIDE SUPPORT LH


    1. A01T8CIC01
      *a Bolt
      *b Screw

      Remove the bolt and screw.

    2. Disengage the 3 claws to remove the front bumper side support LH.

  23. REMOVE FRONT BUMPER SIDE SUPPORT RH

    Tech Tips

    Use the same procedure as for the LH side.

  24. REMOVE FRONT BUMPER ENERGY ABSORBER


    1. A01TBF1

      Disengage the 6 guides to remove the front bumper energy absorber.

  25. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY


    1. A01T9S0

      Disengage each clamp.

    2. Remove the 8 bolts and front bumper reinforcement sub-assembly.