| DTC Code | DTC Name |
|---|---|
| B2414 | Steering Position Sensor Malfunction |
DESCRIPTION
The AFS ECU (headlight swivel ECU assembly) receives signals indicating direction and amount the steering is turned from the steering angle sensor using CAN communication.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B2414 | Steering Position Sensor Malfunction | Malfunction in steering angle sensor |
|
WIRING DIAGRAM
| *a | Spiral w/ Sensor Cable Sub-assembly (Steering Angle Sensor) |
| *b | AFS ECU (Headlight Swivel ECU Assembly) |
| *c | CAN Communication Line |
CAUTION / NOTICE / HINT
Note
Perform the communication function inspections in Diagnosis System to confirm that there are no CAN communication malfunctions before performing the following procedure.
If the AFS ECU (headlight swivel ECU assembly) has been replaced, it is necessary to synchronize the vehicle information and initialize the AFS ECU (headlight swivel ECU assembly).
PROCEDURE
CHECK FOR DTC
Clear the DTCs.
Check for DTCs.
| OK |
|---|
| DTC B2414 is not output. |
| Result | |||
|---|---|---|---|
|
| OK |
|
USE SIMULATION METHOD TO CHECK Click here |
| NG |
|
CHECK SPIRAL W/ SENSOR CABLE SUB-ASSEMBLY (STEERING ANGLE SENSOR)
Replace the spiral w/ sensor cable sub-assembly with a new or known good one.
w/ VSC: Click here
w/o VSC: Click here
Check for DTCs.
| OK |
|---|
| DTC B2414 is not output. |
| Result | |||
|---|---|---|---|
|
| OK |
|
END (STEERING ANGLE SENSOR WAS DEFECTIVE) |
| NG |
|
REPLACE AFS ECU (HEADLIGHT SWIVEL ECU ASSEMBLY) Click here |