HEADLIGHT DIMMER SWITCH INSPECTION

PROCEDURE


  1. INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY


    1. A012F5FC06
      *a

      Component without harness connected

      (Headlight Dimmer Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Light Control Switch
      Tester Connection Condition Specified Condition
      18 (T) - 15 (EL) Light control switch off 10 kΩ or higher
      19 (H) - 15 (EL) 10 kΩ or higher
      20 (A)*1 - 15 (EL) 10 kΩ or higher
      18 (T) - 15 (EL) Light control switch in tail position Below 1 Ω
      18 (T) - 15 (EL) Light control switch in head position Below 1 Ω
      19 (H) - 15 (EL) Below 1 Ω
      20 (A)*1 - 15 (EL) Light control switch in AUTO position Below 1 Ω
      Dimmer Switch
      Tester Connection Condition Specified Condition
      16 (HL) - 15 (EL) Dimmer switch in low position Below 1 Ω
      14 (HU) - 15 (EL) Dimmer switch in high position Below 1 Ω
      14 (HU) - 15 (EL) Dimmer switch in high flasher position Below 1 Ω
      17 (HF) - 15 (EL) Below 1 Ω
      Turn Signal Switch
      Tester Connection Condition Specified Condition
      12 (TR) - 15 (EL) Turn signal switch in neutral position 10 kΩ or higher
      11 (TL) - 15 (EL) 10 kΩ or higher
      12 (TR) - 15 (EL) Turn signal switch in right turn position Below 1 Ω
      11 (TL) - 15 (EL) Turn signal switch in left turn position Below 1 Ω
      Fog Light Switch
      Tester Connection Condition Specified Condition
      9 (BFG)*2 - 8 (LFG) Fog light switch off 10 kΩ or higher
      9 (BFG)*2 - 8 (LFG) Fog light switch in front position Below 1 Ω
      7 (B)*3 - 8 (LFG) Fog light switch off 10 kΩ or higher
      7 (B)*3 - 8 (LFG) Fog light switch in rear position Below 1 Ω

      • *1: w/ Automatic Light Control

      • *2: w/ Front Fog Light

      • *3: w/ Rear Fog Light

      If the result is not as specified, replace the headlight dimmer switch assembly.