REAR LIGHT ASSEMBLY(except Sedan) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL REAR LIGHT ASSEMBLY

   
   

   1. Install the rear light assembly with the 3 nuts.

      Torque:

      5.9 N*m  { 60 kgf*cm, 52 in.*lbf }

   2. Connect the connector.

2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY (for Wagon)

   Click here

3. INSTALL BACK DOOR TRIM PANEL ASSEMBLY (for Hatchback)

   Click here

4. INSTALL DOOR PULL HANDLE (for Wagon)

   Click here

5. INSTALL DOOR PULL HANDLE (for Hatchback)

   Click here

6. INSTALL BACK DOOR SIDE GARNISH LH (for Wagon)

   Click here

7. INSTALL BACK DOOR SIDE GARNISH LH (for Hatchback)

   w/ Back Door Side Garnish: Click here

8. INSTALL BACK DOOR SIDE GARNISH RH (for Wagon)

   Tech Tips

   Use the same procedure as for the LH side.

9. INSTALL BACK DOOR SIDE GARNISH RH (for Hatchback)

   w/ Back Door Side Garnish:

   Tech Tips

   Use the same procedure as for the LH side.

10. INSTALL BACK DOOR UPPER TRIM PANEL ASSEMBLY (for Wagon)

    Click here

11. INSTALL BACK DOOR UPPER TRIM PANEL ASSEMBLY (for Hatchback)

    w/o Back Door Side Garnish: Click here

    w/ Back Door Side Garnish: Click here