REAR LIGHT ASSEMBLY(except Sedan) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.


  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL REAR LIGHT ASSEMBLY


    1. Install the rear light assembly with the 3 nuts.

      Torque:
      5.9 N*m  { 60 kgf*cm, 52 in.*lbf }

    2. Connect the connector.

  2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY

    Click here

  3. INSTALL DOOR PULL HANDLE

    Click here

  4. INSTALL BACK DOOR SIDE GARNISH LH (w/ Back Door Side Garnish)

    Click here

  5. INSTALL BACK DOOR SIDE GARNISH RH (w/ Back Door Side Garnish)

    Tech Tips

    Use the same procedure as for the LH side.

  6. INSTALL BACK DOOR UPPER TRIM PANEL ASSEMBLY (w/o Back Door Side Garnish)

    Click here

  7. INSTALL BACK DOOR UPPER TRIM PANEL ASSEMBLY (w/ Back Door Side Garnish)

    Click here