REAR COMBINATION LIGHT ASSEMBLY(for Sedan) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT ASSEMBLY


    1. A01D5RC

      Engage the 3 guides to temporarily install the rear combination light assembly as shown in the illustration.

    2. Install the rear combination light assembly with the 3 nuts.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    3. Engage the 2 clamps.

    4. Connect the 2 connectors.

    5. A01D619

      Install the luggage compartment trim cover assembly to the original position as shown in the illustration.

    6. Install the 2 clips.

    7. Remove the protective tape.