REAR COMBINATION LIGHT ASSEMBLY(for Sedan) DISASSEMBLY

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE TAIL AND STOP LIGHT BULB (for Bulb Type)

   
   

   1. 

      Turn the tail and stop light socket with the tail and stop light bulb as shown in the illustration to remove them as a unit.

   2. Remove the tail and stop light bulb from the tail and stop light socket.

2. REMOVE TAIL AND STOP LIGHT SOCKET (for Bulb Type)

3. REMOVE REAR TURN SIGNAL LIGHT BULB

   
   

   1. 

      Turn the rear turn signal light socket with the rear turn signal light bulb as shown in the illustration to remove them as a unit.

   2. Remove the rear turn signal light bulb from the rear turn signal light socket.

4. REMOVE REAR TURN SIGNAL LIGHT SOCKET

5. REMOVE REAR COMBINATION LIGHT LENS GASKET

   
   

   1. 

      Remove the rear combination light lens gasket.

      Note

      
      

      • Be sure to remove all traces of the old rear combination light lens gasket from the vehicle body.

      • Do not reuse the removed rear combination light lens gasket. Be sure to install a new rear combination light lens gasket to prevent water ingress.

6. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY (for LED Type)

   
   

   1. 

      Disengage the clamp.

   2. Disconnect the connector to remove the rear combination light socket and wire sub-assembly.

7. REMOVE REAR COMBINATION LIGHT LENS AND BODY