REAR COMBINATION LIGHT ASSEMBLY(for Sedan) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE REAR COMBINATION LIGHT ASSEMBLY


    1. A01T9O8C01
      A01TCKT Protective Tape

      Apply protective tape around the rear combination light assembly.

    2. A01TDRN

      Remove the 2 clips.

    3. A01T8IF

      Turn back the luggage compartment trim cover assembly as shown in the illustration.

    4. Disconnect each connector.

    5. Disengage each clamp.

    6. A01TBHO

      Remove the 3 nuts.

    7. A01TC16

      Disengage the 3 guides and remove the rear combination light assembly as shown in the illustration.