HEADLIGHT ASSEMBLY(except Sedan) REPAIR

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.


  • The procedure listed below is for the LH side.


  • If the installation area of the headlight assembly is damaged, use a supply retainer for a low-cost repair.


  • Ensure that the headlight assembly is not damaged.

PROCEDURE


  1. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER


    1. A01KRG4

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the upper headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A01KTYN

      Install the upper headlight protector retainer with the 2 screws.

  2. INSTALL LOWER HEADLIGHT PROTECTOR RETAINER


    1. A01KRWT

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the lower headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A01KRWU

      Install the lower headlight protector retainer with the screw.