HEADLIGHT ASSEMBLY(except Sedan) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.


  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL HEADLIGHT ASSEMBLY


    1. for Halogen Headlight:


      1. Connect the 2 connectors.

      2. Engage the 2 clamps.

    2. for HID Headlight:


      1. Connect the 2 connectors.

      2. Engage the clamp.

    3. A012KOO

      Engage the claw to temporarily install the headlight assembly.

    4. Install the headlight assembly with the screw and 2 bolts.

      Torque:
      Bolt
      5.9 N*m  { 60 kgf*cm, 52 in.*lbf }

  2. INSTALL NO. 2 RADIATOR AIR GUIDE (for 1AD-FTV, 1ND-TV)


    1. Install the No. 2 radiator air guide with the 5 clips.

  3. INSTALL FRONT BUMPER ASSEMBLY

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for HID Headlight)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  5. ADJUST HEADLIGHT AIMING

    Click here

  6. ADJUST FOG LIGHT AIMING

    Click here