HEADLIGHT ASSEMBLY(except Sedan) DISASSEMBLY

PROCEDURE


  1. REMOVE NO. 1 HEADLIGHT BULB (for Halogen Headlight)


    1. A00YA9O

      Remove the cover.

    2. A00Y5IX

      Disconnect the connector.

    3. A00YAE7

      Turn the No. 1 headlight bulb in the direction indicated by the arrow in the illustration to remove it.

      Note

      Do not touch the bulb glass.

  2. REMOVE HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY (for HID Headlight)


    1. A00Y691

      Turn the headlight light control ECU sub-assembly in the direction indicated by the arrow in the illustration to separate it.

      Note


      • Do not apply excessive force using a tool.


      • Do not damage the O-ring or allow it to become contaminated with foreign matter. If the O-ring is damaged or contaminated, water may get into the headlight assembly, resulting in a malfunction of the headlight light control ECU sub-assembly.

    2. A00Y8EJ

      Turn the socket of the headlight light control ECU sub-assembly in the direction indicated by the arrow in the illustration to remove it.

      Note

      Do not pull the headlight light control ECU sub-assembly with the socket connected.

  3. REMOVE DISCHARGE HEADLIGHT BULB (for HID Headlight)


    1. A00Y5UMC02

      Release the set spring as shown in the illustration and remove the discharge headlight bulb.

      Note

      Do not touch the bulb glass.

  4. REMOVE FRONT TURN SIGNAL LIGHT BULB


    1. A00Y9CR

      Turn the front turn signal light socket with the front turn signal light bulb in the direction indicated by the arrow in the illustration, and remove them as a unit.

    2. Remove the front turn signal light bulb from the front turn signal light socket.