HEADLIGHT ASSEMBLY(except Sedan) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.


  • The procedure described below is for the LH side.

PROCEDURE


  1. PRECAUTION (for HID Headlight)

    Click here

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for HID Headlight)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE FRONT BUMPER ASSEMBLY

    Click here

  4. REMOVE NO. 2 RADIATOR AIR GUIDE (for 1AD-FTV, 1ND-TV)


    1. A012H6E

      Remove the 5 clips and No. 2 radiator air guide.

  5. REMOVE HEADLIGHT ASSEMBLY

    CAUTION:

    The headlight light control ECU sub-assembly may be hot when the light control switch is in the HEAD position or right after it is turned off. Check that the headlight light control ECU sub-assembly is not hot before starting work. (for HID Headlight)


    1. A012MHFC02
      *a Bolt
      *b Screw

      Remove the screw and 2 bolts.

    2. Disconnect the connector.

    3. A012LZC

      Disengage the claw to separate the headlight assembly as shown in the illustration.

    4. for Halogen Headlight:


      1. A012GUO

        Disengage the 2 clamps.

      2. Disconnect the 2 connectors to remove the headlight assembly.

    5. for HID Headlight:


      1. A012L3T

        Disengage the clamp.

      2. Disconnect the 2 connectors to remove the headlight assembly.