HEADLIGHT ASSEMBLY(for Sedan) REPAIR

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.


  • The procedure listed below is for the LH side.


  • If the installation area of the headlight assembly is damaged, use a supply retainer for a low-cost repair.


  • Ensure that the headlight assembly is not damaged.

PROCEDURE


  1. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER


    1. A01D6HB

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the upper headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of a supply retainer.

    2. A01D674

      Install the upper headlight protector retainer with the 2 screws.

  2. INSTALL UPPER NO. 2 HEADLIGHT PROTECTOR RETAINER


    1. A01D65H

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the upper No. 2 headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of a supply retainer.

    2. A01D68J

      Install the upper No. 2 headlight protector retainer with the 2 screws.

  3. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER LH


    1. A01D5IJ

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the upper headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of a supply retainer.

    2. A01D5AU

      Install the upper headlight protector retainer LH with the 2 screws.

  4. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER RH


    1. A01D5DW

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the upper headlight protector retainer RH against the bosses and gradually file away the old bracket if it interferes with the installation of a supply retainer.

    2. A01D3RG

      Install the upper headlight protector retainer RH with the 2 screws.

  5. INSTALL LOWER HEADLIGHT PROTECTOR RETAINER


    1. A01D4RD

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the lower headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of a supply retainer.

    2. A01D60K

      Install the lower headlight protector retainer with the 2 screws.