HEADLIGHT ASSEMBLY(for Sedan) REASSEMBLY

PROCEDURE


  1. INSTALL HEADLIGHT BRACKET


    1. A01M2JX

      Engage the 2 guides and install the 2 headlight brackets to the headlight unit with the 2 screws.

  2. INSTALL HEADLIGHT LEVELING MOTOR BASE PACKING


    1. Install a new headlight leveling motor base packing.

  3. INSTALL HEADLIGHT LEVELING MOTOR


    1. A01LZGJC01
      *a Aiming Screw

      Insert the headlight leveling motor in the direction indicated by the arrow (1) shown in the illustration.

    2. Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (2) shown in the illustration to engage the shaft.

      Tech Tips

      Turn the aiming screw the same number of times as it was turned during removal.

    3. A01LVOAC01
      *a Aiming Screw

      Turn the headlight leveling motor in the direction indicated by the arrow (3) shown in the illustration and engage the pin to install the headlight leveling motor to the headlight assembly.

      Tech Tips

      When installing the headlight leveling motor of the headlight assembly RH, turn the headlight leveling motor in the opposite direction of the arrow (3) shown in the illustration.

    4. Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (4) shown in the illustration.

      Tech Tips

      Turn the aiming screw the same number of times as it was turned during removal.

  4. INSTALL FRONT TURN SIGNAL LIGHT BULB


    1. Install the front turn signal light bulb to the headlight cord.

    2. A01M1LK

      Turn the headlight cord with the front turn signal light bulb as shown in the illustration to connect them as a unit.

  5. INSTALL CLEARANCE LIGHT BULB (for Bulb Type)


    1. Install the clearance light bulb to the headlight cord.

    2. A01LUXM

      Turn the headlight cord with the clearance light bulb as shown in the illustration to connect them as a unit.

  6. INSTALL NO. 1 HEADLIGHT COVER


    1. A01LVHZ

      Install the 2 No. 1 headlight covers to the headlight unit.

  7. INSTALL NO. 2 HEADLIGHT BULB


    1. A01LZJC

      Turn the No. 2 headlight bulb as shown in the illustration to install it.

      Note

      Do not touch the bulb glass.

  8. INSTALL NO. 1 HEADLIGHT BULB


    1. A01LZSC

      Turn the No. 1 headlight bulb as shown in the illustration to install it.

      Note

      Do not touch the bulb glass.

  9. INSTALL HEADLIGHT COVER


    1. A01LUZ2

      Engage the 9 guides and 2 claws to install the headlight cover to the headlight unit.

    2. Install the 5 screws.