HEADLIGHT ASSEMBLY(for Sedan) DISASSEMBLY

PROCEDURE


  1. REMOVE HEADLIGHT COVER


    1. A012N4X

      Remove the 5 screws.

    2. Disengage the 2 claws and 9 guides to remove the headlight cover from the headlight unit.

  2. REMOVE NO. 1 HEADLIGHT BULB


    1. A012HF7

      Turn the No. 1 headlight bulb as shown in the illustration to remove it.

      Note

      Do not touch the bulb glass.

  3. REMOVE NO. 2 HEADLIGHT BULB


    1. A012FLN

      Turn the No. 2 headlight bulb as shown in the illustration to remove it.

      Note

      Do not touch the bulb glass.

  4. REMOVE NO. 1 HEADLIGHT COVER


    1. A012MAH

      Remove the 2 No. 1 headlight socket covers from the headlight unit.

  5. REMOVE FRONT TURN SIGNAL LIGHT BULB


    1. A012IIN

      Turn the headlight cord with the front turn signal light bulb as shown in the illustration, and disconnect them as a unit.

    2. Remove the front turn signal light bulb from the headlight cord.

  6. REMOVE HEADLIGHT LEVELING MOTOR


    1. A012MVFC01
      *a Aiming Screw

      Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (1) shown in the illustration.

      Tech Tips


      • Turn the aiming screw until the headlight leveling motor can be moved in the direction indicated by the arrow (2) shown in the illustration.

      • Make sure to remember the number of aiming screw rotations.

    2. Turn the headlight leveling motor in the direction indicated by the arrow (2) shown in the illustration to disengage the pin.

      Tech Tips

      When removing the headlight leveling motor of the headlight assembly RH, turn the headlight leveling motor in the opposite direction of the arrow (2) shown in the illustration.

    3. A012IWDC01
      *a Aiming Screw

      Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (3) shown in the illustration to disengage the shaft.

      Tech Tips

      Make sure to remember the number of aiming screw rotations.

    4. Pull out the headlight leveling motor in the direction indicated by the arrow (4) shown in the illustration to remove it.

  7. REMOVE HEADLIGHT LEVELING MOTOR BASE PACKING


    1. Remove the headlight leveling motor base packing.

      Note

      After the headlight leveling motor base packing is removed, be sure to replace it with a new one. Failure to do so may cause water ingress.

  8. REMOVE HEADLIGHT BRACKET


    1. A012GNN

      Remove the 2 screws.

    2. Disengage the 2 guides to remove the 2 headlight brackets from the headlight unit.