RAIN SENSOR REMOVAL

PROCEDURE


  1. REMOVE RAIN SENSOR COVER


    1. A00YAH4

      Disengage the 2 guides and disconnect the rain sensor cover as shown in the illustration.

    2. A00Y89R

      Disengage the 2 claws and remove the rain sensor cover.

  2. REMOVE RAIN SENSOR


    1. A00YAAR

      Disconnect the connector.

    2. A00Y9S5C02
      *a Stopper

      Release the stopper by pulling the stopper down and disconnect the rain sensor as shown in the illustration.

  3. CLEAN WINDSHIELD GLASS

    Tech Tips


    • Rain sensor tape is reusable. Only replace the tape if it is damaged or contaminated.


    • Check that there is no rain sensor tape residue remaining on the windshield glass. If there is, remove the residue before installing the rain sensor.