FRONT WIPER MOTOR ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY


    1. for LH Side:


      1. A00Y61BC02
        *a Dot

        Operate the windshield wiper motor assembly.

      2. Stop the windshield wiper motor assembly operation.

      3. Check the automatic stop (park) position.

        Tech Tips

        After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.

        Standard Clearance
        Area Measurement
        A 10.0 mm (0.394 in.)
        OK
        The front wiper stops at the position shown in the illustration.

    2. for RH Side:


      1. A00Y845C02
        *a Dot

        Operate the windshield wiper motor assembly.

      2. Stop the windshield wiper motor assembly operation.

      3. Check the automatic stop (park) position.

        Tech Tips

        After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.

        Standard Clearance
        Area Measurement
        A 10.0 mm (0.394 in.)
        OK
        The front wiper stops at the position shown in the illustration.