WASHER NOZZLE(for Front Side) ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY (for Hatchback, Wagon)


    1. Operate the washer nozzle sub-assembly and check the position that the washer fluid hits the windshield.

      Standard
      Washer fluid hits the windshield in the areas shown in the illustration.
      A012M7QC01
      *a Vehicle center line - -
      A012F6O Measurement - -
      Standard Measurement
      Area Measurement Area Measurement
      A 405 mm (1.33 ft.) B 165 mm (6.50 in.)
      C 100 mm (3.94 in.) - -

      Tech Tips

      If the result is not as specified, replace the washer nozzle sub-assembly.

  2. INSPECT WASHER NOZZLE SUB-ASSEMBLY (for Sedan)


    1. Operate the washer nozzle sub-assembly and check the position that the washer fluid hits the windshield.

      Standard
      Washer fluid hits the windshield in the areas shown in the illustration.
      A012M7QC03
      *a Vehicle center line - -
      A012F6O Measurement - -
      Standard Measurement
      Area Measurement Area Measurement
      A 500 mm (1.64 ft.) B 165 mm (6.50 in.)
      C 75 mm (2.95 in.) - -

      Tech Tips

      If the result is not as specified, replace the washer nozzle sub-assembly.