WASHER NOZZLE(for Wagon Rear Side) ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT REAR WASHER NOZZLE


    1. Operate the rear washer nozzle and check the position that the washer fluid hits the back door glass.

      Standard
      Washer fluid hits the back door glass in the area shown in the illustration.
      A012GVZC01
      *a Vehicle Center Line *b Edge of Back Door Glass
      A012F6O Measurement - -
      Standard Measurement
      Area Measurement Area Measurement
      A 35.9 mm (1.41 in.) B 9.3 mm (0.366 in.)
      C 34.8 mm (1.37 in.) D 7.1 mm (0.28 in.)
      E 3.5 mm (0.138 in.) F 4.9 mm (0.193 in.)
      G 81.1 mm (3.19 in.) H 110.1 mm (4.33 in.)

      Tech Tips

      If the result is not as specified, replace the rear washer nozzle.