OUTER REAR VIEW MIRROR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY WITH COVER


    1. Engage the 3 guides and install the outer rear view mirror assembly with cover with the 3 screws.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    2. Connect the connector.

    3. Install the 2 clips.

  2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

    for Sedan: Click here

    for Hatchback, Wagon: Click here

  3. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH

    for Sedan: Click here

    for Hatchback, Wagon: Click here

  4. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

    for Sedan: Click here

    for Hatchback, Wagon: Click here

  5. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

    for Sedan: Click here

    for Hatchback, Wagon: Click here

  6. INSTALL FRONT ARMREST ASSEMBLY (for Sedan)

    Click here

  7. INSTALL DOOR ASSIST GRIP COVER (for Sedan)

    Click here

  8. INSTALL DOOR ASSIST GRIP ASSEMBLY (for Hatchback, Wagon)

    Click here