LUGGAGE DOOR LOCK CONTROL CABLE ASSEMBLY(for LHD) INSTALLATION

PROCEDURE

1. INSTALL LUGGAGE DOOR LOCK CONTROL CABLE SUB-ASSEMBLY

   
   

   1. Engage the 9 clamps to install the luggage door lock control cable sub-assembly.

   2. Engage the 6 clamps to connect the luggage door lock control cable sub-assembly.

   3. Connect the luggage door lock control cable sub-assembly.

   4. 

      Engage the 2 claws as shown in the illustration.

   5. Return the floor carpet to the original position.

   6. Install the clip.

   7. Engage the 4 clamps.

2. INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

   
   

   1. 

      *1	Luggage Door Lock Control Cable Sub-assembly
      *2	Fuel Lid Lock Control Cable Sub-assembly

      Connect the fuel lid lock control cable sub-assembly and luggage door lock control cable sub-assembly to the fuel lid lock open lever sub-assembly.

   2. 

      Engage the guide as shown in the illustration.

   3. Install the fuel lid lock open lever sub-assembly with the screw.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

3. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH

   
   

   1. Install the luggage compartment trim cover assembly RH with the 3 clips.

4. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

   
   
   1. 

      *a

      Pin

      Engage the pin to install the No. 1 luggage compartment trim hook.

5. INSTALL JACK ASSEMBLY

   
   

   1. Install the jack assembly.

6. INSTALL LUGGAGE COMPARTMENT SIDE TRAY ASSEMBLY

   
   

   1. Engage the 5 guides to install the luggage compartment side tray assembly.

7. INSTALL REAR FLOOR FINISH PLATE

   
   

   1. Engage the 6 guides and 4 claws to install the rear floor finish plate.

   2. Install the 2 clips.

8. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH

   Click here

9. INSTALL LUGGAGE COMPARTMENT DOOR COVER

   Click here

10. INSTALL REAR SEAT SIDE GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

11. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

12. INSTALL CENTER PILLAR LOWER GARNISH LH

    Click here

13. CONNECT FRONT SEAT OUTER BELT ASSEMBLY LH

    Click here

14. INSTALL LAP BELT OUTER ANCHOR COVER (for LH Side)

    Click here

15. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

16. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

17. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

18. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here

19. INSTALL CENTER PILLAR LOWER GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

20. CONNECT FRONT SEAT OUTER BELT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

21. INSTALL LAP BELT OUTER ANCHOR COVER (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

22. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Click here

23. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

24. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

    Click here

25. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

26. INSTALL REAR SEATBACK ASSEMBLY RH

    Click here

27. INSTALL FRONT SEAT ASSEMBLY LH

    Click here

28. INSTALL FRONT SEAT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.