PROCEDURE
REMOVE FRONT SEAT ASSEMBLY LH
REMOVE FRONT SEAT ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE REAR SEATBACK ASSEMBLY RH
REMOVE FRONT DOOR SCUFF PLATE LH
DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH
REMOVE REAR DOOR SCUFF PLATE LH
DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH
REMOVE LAP BELT OUTER ANCHOR COVER (for LH Side)
DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH
REMOVE CENTER PILLAR LOWER GARNISH LH
REMOVE FRONT DOOR SCUFF PLATE RH
Tech Tips
Use the same procedure as for the LH side.
DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE REAR DOOR SCUFF PLATE RH
Tech Tips
Use the same procedure as for the LH side.
DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE LAP BELT OUTER ANCHOR COVER (for RH Side)
Tech Tips
Use the same procedure as for the LH side.
DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE CENTER PILLAR LOWER GARNISH RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY (for RH Side)
REMOVE REAR SEAT SIDE GARNISH RH
REMOVE LUGGAGE COMPARTMENT DOOR COVER
REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH
REMOVE REAR FLOOR FINISH PLATE
Using a clip remover, remove the 2 clips.
Disengage the 4 claws and 6 guides and remove the rear floor finish plate.
REMOVE LUGGAGE COMPARTMENT SIDE TRAY ASSEMBLY
Disengage the 5 guides and remove luggage compartment side tray assembly.
REMOVE JACK ASSEMBLY
Remove the jack assembly.
REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
| *a | Pin |
Push the pin and remove the No. 1 luggage compartment trim hook.
REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH
Using a clip remover, remove the 3 clips and luggage compartment trim cover assembly RH.
REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY
Remove the screw.
Disengage the guide and disconnect the fuel lid lock open lever sub-assembly as shown in the illustration.
Disconnect the fuel lid lock control cable sub-assembly and luggage door lock control cable sub-assembly and remove the fuel lid lock open lever sub-assembly.
REMOVE LUGGAGE DOOR LOCK CONTROL CABLE SUB-ASSEMBLY
Disengage the 2 clamps.
Disengage the 2 clamps.
Using a clip remover, remove the clip.
Turn back the floor carpet so that the luggage door lock control cable sub-assembly can be removed.
Disengage the 2 claws as shown in the illustration.
Disconnect the luggage door lock control cable sub-assembly.
Disengage the 6 clamps and disconnect the luggage door lock control cable sub-assembly.
Disengage the 9 clamps and remove the luggage door lock control cable sub-assembly.