FUEL LID LOCK CONTROL CABLE ASSEMBLY(for Sedan RHD) INSTALLATION

PROCEDURE

1. INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

   
   

   1. Engage the 10 clamps to install the fuel lid lock control cable sub-assembly.

   2. Engage the 2 claws to connect the fuel lid lock control cable sub-assembly.

   3. Return the floor carpet to the original position.

   4. Install the clip.

   5. Engage the 4 clamps.

2. INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

   Click here

3. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH

   Click here

4. INSTALL REAR FLOOR FINISH PLATE

   Click here

5. INSTALL REAR SEAT SIDE GARNISH LH

   Click here

6. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY

   Click here

7. INSTALL CENTER PILLAR LOWER GARNISH LH

   Click here

8. CONNECT FRONT SEAT OUTER BELT ASSEMBLY LH

   Click here

9. INSTALL LAP BELT OUTER ANCHOR COVER (for LH Side)

   Click here

10. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

11. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

12. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

13. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here

14. INSTALL CENTER PILLAR LOWER GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

15. CONNECT FRONT SEAT OUTER BELT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

16. INSTALL LAP BELT OUTER ANCHOR COVER (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

17. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Click here

18. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

19. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

    Click here

20. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

21. INSTALL REAR SEATBACK ASSEMBLY LH

    Click here

22. INSTALL FRONT SEAT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

23. INSTALL FRONT SEAT ASSEMBLY LH

    Tech Tips

    Use the same procedure as for the RH side.