CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for both the RH and LH sides.
The procedure described below is for the LH side.
PROCEDURE
REMOVE OUTER MIRROR
Push the upper part of the outer mirror surface and tilt it.
|
Protective Tape |
Apply protective tape to the lower part of the outer rear view mirror assembly with cover.
Using a moulding remover, disengage the 8 claws at the lower part of the outer rear view mirror assembly with cover, and remove the outer mirror.
Note
Do not pull the outer mirror with excessive force. Doing so may cause the actuator to come off or break the mirror surface.
w/ Mirror Heater:
Disconnect the 2 connectors and remove the outer mirror.