LUGGAGE DOOR HINGE TORSION BAR INSTALLATION

CAUTION / NOTICE / HINT

Note

After installing the luggage door hinge torsion bar, use your hand to open and close the luggage door. Make sure the luggage door can open and close smoothly.

PROCEDURE


  1. INSTALL LUGGAGE COMPARTMENT DOOR TORSION BAR SUPPORT


    1. A012K2I

      Install a new luggage compartment door torsion bar support as shown in the illustration.

  2. INSTALL LUGGAGE DOOR HINGE TORSION BAR LH


    1. Check the identification mark on the luggage door hinge torsion bar LH.

      Identification Mark Color
      Blue
    2. A012MBR

      Connect the luggage door hinge torsion bar LH to the right side of the vehicle body as shown in the illustration.

    3. A012M30N01

      Using SST, install the luggage door hinge torsion bar LH to the luggage door hinge and the left side of the vehicle body as indicated by the arrows, in the order shown in the illustration.

      SST
      09804-24010
    4. A012JWM

      Connect the luggage door hinge torsion bar LH to the luggage compartment door torsion bar support as shown in the illustration.

  3. INSTALL LUGGAGE DOOR HINGE TORSION BAR RH


    1. Check the identification mark on the luggage door hinge torsion bar RH.

      Identification Mark Color
      Green
    2. A012JT5

      Connect the luggage door hinge torsion bar RH to the left side of the vehicle body as shown in the illustration.

    3. A012I9KN01

      Using SST, install the luggage door hinge torsion bar RH to the luggage door hinge and the right side of the vehicle body as indicated by the arrows, in the order shown in the illustration.

      SST
      09804-24010
    4. A012KC1

      Connect the luggage door hinge torsion bar RH to the luggage compartment door torsion bar support as shown in the illustration.