BACK DOOR OPENER SWITCH(for Hatchback) INSPECTION

PROCEDURE


  1. INSPECT BACK DOOR OPENER SWITCH ASSEMBLY


    1. Check the operation of the back door opener switch.


      1. A00YAGLC32
        *a

        Component without harness connected

        (Back Door Opener Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        2 (E) - 3 (UL) Back door opener switch not pushed 10 kΩ or higher
        2 (E) - 3 (UL) Back door opener switch pushed Below 1 Ω

        If the result is not specified, replace the back door opener switch assembly.

    2. Check operation of the back door lock switch.


      1. A00YAGLC33
        *a

        Component without harness connected

        (Back Door Opener Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 (L) - 2 (E) Back door lock switch not pushed 10 kΩ or higher
        1 (L) - 2 (E) Back door lock switch pushed Below 1 Ω

        If the result is not specified, replace the back door opener switch assembly.