HOOD LOCK CONTROL CABLE ASSEMBLY(for Sedan) REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL LH (for LHD)

  2. REMOVE FRONT FENDER MUDGUARD LH (for LHD)

    w/ Mudguard:

    Click here

  3. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH (for LHD)

    Click here

  4. REMOVE FRONT FENDER LINER LH (for LHD)

    Click here

  5. REMOVE FRONT WHEEL RH (for RHD)

  6. REMOVE FRONT FENDER MUDGUARD RH (for RHD)

    w/ Mudguard:

    Tech Tips

    Use the same procedure for the RH side and LH side.

    Click here

  7. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH (for RHD)

    Tech Tips

    Use the same procedure for the RH side and LH side.

    Click here

  8. REMOVE FRONT FENDER LINER RH (for RHD)

    Tech Tips

    Use the same procedure for the RH side and LH side.

    Click here

  9. REMOVE FRONT DOOR SCUFF PLATE LH (for LHD)

    Click here

  10. REMOVE COWL SIDE TRIM BOARD LH (for LHD)

    Click here

  11. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

    Click here

  12. REMOVE FRONT DOOR SCUFF PLATE RH (for RHD)

    Tech Tips

    Use the same procedure for the RH side and LH side.

    Click here

  13. REMOVE COWL SIDE TRIM BOARD RH (for RHD)

    Tech Tips

    Use the same procedure for the RH side and LH side.

    Click here

  14. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

    Tech Tips

    Use the same procedure for the RH side and LH side.

    Click here

  15. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

    Click here

  16. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. A002ZPH

      Disconnect the hood lock control cable assembly and remove the hood lock control lever sub-assembly.

  17. REMOVE HOOD LOCK ASSEMBLY (for LHD)


    1. w/ Engine Hood Courtesy Switch:


      1. A00311F

        Disconnect the connector.

      2. Disengage the clamp.

    2. A002ZPS

      Remove the 3 bolts.

    3. A00314Z

      Disconnect the hood lock control cable assembly and remove the hood lock assembly.

  18. REMOVE HOOD LOCK ASSEMBLY (for RHD)


    1. w/ Engine Hood Courtesy Switch:


      1. A00312T

        Disconnect the connector.

      2. Disengage the clamp.

    2. A0030A5

      Remove the 3 bolts.

    3. A002ZR3

      Disconnect the hood lock control cable assembly and remove the hood lock assembly.

  19. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for LHD)


    1. Using a screwdriver, disengage the 4 clamps and hood cable grommet as shown in the illustration.

      A00306YC01
      *1 Hood Lock Control Cable Assembly - -
      *a Clamp *b Hood Cable Grommet

      Tech Tips

      Tape the screwdriver tip before use.

    2. Pull the hood lock control cable assembly from the engine compartment and remove it.

  20. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD)


    1. Using a screwdriver, disengage 4 clamps and hood cable grommet as shown in the illustration.

      A002ZT4C01
      *1 Hood Lock Control Cable Assembly - -
      *a Clamp *b Hood Cable Grommet

      Tech Tips

      Tape the screwdriver tip before use.

    2. Pull the hood lock control cable assembly from the engine compartment and remove it.