HOOD(for Hatchback, Wagon) DISASSEMBLY

PROCEDURE


  1. REMOVE HOOD LOCK ASSEMBLY


    1. w/ Bracket:


      1. A01M23I

        Remove the 2 bolts.

      2. Disengage the guide and disconnect the No. 1 water hose clamp bracket.

    2. for LHD:


      1. A01LUVA

        Disconnect the hood lock control cable assembly.

    3. for RHD:


      1. A01M14I

        Disconnect the hood lock control cable assembly.

    4. w/o Engine Hood Courtesy Switch:


      1. A01M14Z

        Remove the 3 bolts and hood lock assembly.

    5. w/ Engine Hood Courtesy Switch:


      1. A01LV3F

        Remove the 3 bolts.

      2. Disconnect the connector and remove the hood lock assembly.

  2. REMOVE HOOD INSULATOR (w/ Hood Insulator)


    1. A01M0FJ

      Remove the 6 hood insulator clips.

    2. Disengage the guide and remove the hood insulator.

  3. REMOVE HOOD TO RADIATOR SUPPORT SEAL (w/ Hood To Radiator Support Seal)


    1. A01M19K

      Using a clip remover, disengage the 6 hood to cowl top seal clips and remove the hood to radiator support seal.

  4. REMOVE WASHER NOZZLE SUB-ASSEMBLY

    Click here

  5. DISCONNECT WASHER HOSE ASSEMBLY


    1. A01M1GQ

      Disengage the 6 clamps and disconnect the washer hose assembly.

  6. REMOVE HOOD MOULDING CLIP


    1. A01LXGO

      Disengage the 2 claws and remove the hood moulding clip as shown in the illustration.