HOOD(for Sedan) ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT HOOD SUB-ASSEMBLY


    1. Check that the clearance measurements of areas "a" through "e" are within each standard range.

      A012JRHN01
      Standard Clearance
      Area Measurement Area Measurement
      a 2.35 to 6.35 mm (0.0925 to 0.250 in.) b 2.35 to 6.30 mm (0.0925 to 0.248 in.)
      c -1.5 to 1.5 mm (-0.0591 to 0.0591 in.) d 2.7 to 5.7 mm (0.106 to 0.224 in.)
      e -1.5 to 1.5 mm (-0.0591 to 0.0591 in.) - -