HOOD(for Hatchback, Wagon) REASSEMBLY

PROCEDURE


  1. INSTALL HOOD MOULDING CLIP


    1. A012IQQ

      Engage the 2 claws and install the hood moulding clip.

  2. CONNECT WASHER HOSE ASSEMBLY


    1. A012M3Q

      Engage the 6 clamps to connect the washer hose assembly.

  3. INSTALL WASHER NOZZLE SUB-ASSEMBLY

    Click here

  4. INSPECT WASHER NOZZLE SUB-ASSEMBLY

    Click here

  5. ADJUST WASHER NOZZLE SUB-ASSEMBLY

    Click here

  6. INSTALL HOOD TO RADIATOR SUPPORT SEAL (w/ Hood To Radiator Support Seal)


    1. A012IGO

      Engage the 6 hood to cowl top seal clips to install the hood to radiator support seal.

  7. INSTALL HOOD INSULATOR (w/ Hood Insulator)


    1. A012LDR

      Engage the guide.

    2. Install the hood insulator with 6 new hood insulator clips.

  8. INSTALL HOOD LOCK ASSEMBLY


    1. A012HA6

      Apply MP grease to the sliding areas of the lock.

    2. w/o Engine Hood Courtesy Switch:


      1. A012I17

        Install the hood lock assembly with the 3 bolts.

        Torque:
        7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

    3. w/ Engine Hood Courtesy Switch:


      1. A012G0P

        Install the hood lock assembly with the 3 bolts.

        Torque:
        7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

      2. Connect the connector.

    4. for LHD:


      1. A012FL9

        Connect the hood lock control cable assembly.

    5. for RHD:


      1. A012FGG

        Connect the hood lock control cable assembly.

    6. A012MAJ

      Engage the guide.

    7. Connect the No. 1 water hose clamp bracket with the 2 bolts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

  9. ADJUST HOOD SUB-ASSEMBLY

    Click here