CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for both the RH and LH sides.
The procedure described below is for the LH side.
PROCEDURE
INSTALL REAR DOOR WINDOW REGULATOR ASSEMBLY
INSTALL REAR DOOR GLASS SUB-ASSEMBLY
INSTALL REAR DOOR QUARTER WINDOW GLASS
INSTALL REAR DOOR LOWER WINDOW FRAME SUB-ASSEMBLY
INSTALL NO. 1 REAR DOOR VENT SEAL
INSTALL REAR DOOR GLASS RUN
CONNECT REAR DOOR WEATHERSTRIP
INSTALL REAR DOOR SERVICE HOLE COVER
INSTALL REAR DOOR INNER GLASS WEATHERSTRIP
INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY
INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL
INSTALL REAR ARMREST ASSEMBLY
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
INITIALIZE POWER WINDOW CONTROL SYSTEM
INSPECT POWER WINDOW OPERATION