POWER WINDOW REGULATOR MOTOR(for Sedan Front Side) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  2. INSTALL FRONT DOOR WINDOW REGULATOR ASSEMBLY

    Click here

  3. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY

    Click here

  4. INSTALL FRONT DOOR SERVICE HOLE COVER

    Click here

  5. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  6. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH

    Click here

  7. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

    Click here

  8. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

    Click here

  9. INSTALL FRONT ARMREST ASSEMBLY

    Click here

  10. INSTALL DOOR ASSIST GRIP COVER

    Click here

  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  12. INITIALIZE POWER WINDOW CONTROL SYSTEM


    • for Models with Jam Protection Function on 4 Windows: Click here


    • for Models with Jam Protection Function on Driver Door Window Only: Click here

  13. INSPECT POWER WINDOW OPERATION


    • for Models with Jam Protection Function on 4 Windows: Click here


    • for Models with Jam Protection Function on Driver Door Window Only: Click here