DATA LIST
Tech Tips
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / (desired system) / Data List.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| D Door P/W Auto SW | Driver door power window auto switch signal | ON or OFF | ON: Driver door power window auto switch being operated OFF: Driver door power window auto switch not being operated |
- |
| P Door P/W Auto SW | Front passenger door power window auto up and down switch signal | ON or OFF | ON: Front passenger door power window auto switch being operated OFF: Front passenger door power window auto switch not being operated |
- |
| RR Door P/W Auto SW | Rear RH door power window auto up and down switch signal | ON or OFF | ON: Rear RH power window auto switch being operated OFF: Rear RH power window auto switch not being operated |
- |
| RL Door P/W Auto SW | Rear LH door power window auto up and down switch signal | ON or OFF | ON: Rear LH power window auto switch being operated OFF: Rear LH power window auto switch not being operated |
- |
| P Door P/W Up SW | Front passenger door power window manual up switch signal | ON or OFF | ON: Front passenger door power window manual up switch being operated OFF: Front passenger door power window manual up switch not being operated |
- |
| RR Door P/W up switch | Rear RH door power window manual up switch signal | ON or OFF | ON: Rear RH power window manual up switch being operated OFF: Rear RH power window manual up switch not being operated |
- |
| RL Door P/W up switch | Rear LH door power window manual up switch signal | ON or OFF | ON: Rear LH power window manual up switch being operated OFF: Rear LH power window manual up switch not being operated |
- |
| P Door P/W Down SW | Front passenger door power window manual down switch signal | ON or OFF | ON: Front passenger door power window manual down switch being operated OFF: Front passenger door power window manual down switch not being operated |
- |
| RR Door P/W Down SW | Rear RH door power window manual down switch signal | ON or OFF | ON: Rear RH power window manual down switch being operated OFF: Rear RH power window manual down switch not being operated |
- |
| RL Door P/W Down SW | Rear LH door power window manual down switch signal | ON or OFF | ON: Rear LH power window manual down switch being operated OFF: Rear LH power window manual down switch not being operated |
- |
| Window Lock Switch Status | Window lock switch signal | ON or OFF | ON: Window lock switch LOCK position OFF: Window lock switch UNLOCK position |
- |
| Number of Trouble Codes | Number of trouble codes | Min.: 0 or Max.: 255 | Number of DTCs will be displayed | - |
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| D Door P/W Auto SW | Driver door power window auto switch signal | ON or OFF | ON: Driver door power window auto switch being operated OFF: Driver door power window auto switch not being operated |
- |
| D Door P/W Up SW | Driver door power window manual up switch signal | ON or OFF | ON: Driver door power window manual up switch being operated OFF: Driver door power window manual up switch not being operated |
- |
| D Door P/W Down SW | Driver door power window manual down switch signal | ON or OFF | ON: Driver door power window manual down switch being operated OFF: Driver door power window manual down switch not being operated |
- |
| Number of Trouble Codes | Number of trouble codes | Min.: 0 or Max.: 255 | Number of DTCs will be displayed | - |
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| P Door P/W Auto SW | Front passenger door power window auto switch signal | ON or OFF | ON: Front passenger door power window auto switch being operated OFF: Front passenger door power window auto switch not being operated |
- |
| P Door P/W Up SW | Front passenger door power window manual up switch signal | ON or OFF | ON: Front passenger door power window manual up switch being operated OFF: Front passenger door power window manual up switch not being operated |
- |
| P Door P/W Down SW | Front passenger door power window manual down switch signal | ON or OFF | ON: Front passenger door power window manual down switch being operated OFF: Front passenger door power window manual down switch not being operated |
- |
| Number of Trouble Codes | Number of trouble codes | Min.: 0 or Max.: 255 | Number of DTCs will be displayed | - |
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| RL Door P/W Auto SW | Rear LH door power window auto switch signal | ON or OFF | ON: Rear LH door power window auto switch being operated OFF: Rear LH door power window auto switch not being operated |
- |
| RL Door P/W Up SW | Rear LH door power window manual up switch signal | ON or OFF | ON: Rear LH door power window manual up switch being operated OFF: Rear LH door power window manual up switch not being operated |
- |
| RL Door P/W Down SW | Rear LH door power window manual down switch signal | ON or OFF | ON: Rear LH door power window manual down switch being operated OFF: Rear LH door power window manual down switch not being operated |
- |
| Number of Trouble Codes | Number of trouble codes | Min.: 0 or Max.: 255 | Number of DTCs will be displayed | - |
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| RR Door P/W Auto SW | Rear RH door power window auto switch signal | ON or OFF | ON: Rear RH door power window auto switch being operated OFF: Rear RH door power window auto switch not being operated |
- |
| RR Door P/W Up SW | Rear RH door power window manual up switch signal | ON or OFF | ON: Rear RH door power window manual up switch being operated OFF: Rear RH door power window manual up switch not being operated |
- |
| RR Door P/W Down SW | Rear RH door power window manual down switch signal | ON or OFF | ON: Rear RH door power window manual down switch being operated OFF: Rear RH door power window manual down switch not being operated |
- |
| Number of Trouble Codes | Number of trouble codes | Min.: 0 or Max.: 255 | Number of DTCs will be displayed | - |
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| FR Door Courtesy SW | Front door courtesy switch RH signal | ON or OFF | ON: Front door RH open OFF: Front door RH closed |
- |
| FL Door Courtesy SW | Front door courtesy switch LH signal | ON or OFF | ON: Front door LH open OFF: Front door LH closed |
- |
| Communication D-Door Motor | Connection status between front door window regulator assembly (for driver door) and main body ECU (multiplex network body ECU) | OK or STOP | OK: Normal communication STOP: Communication stopped |
- |
| Communication P-Door Motor | Connection status between front door window regulator assembly (for passenger door) and main body ECU (multiplex network body ECU) | OK or STOP | OK: Normal communication STOP: Communication stopped |
- |
| Communication RR-Door Motor | Connection status between rear door window regulator assembly (for RH door) and main body ECU (multiplex network body ECU) | OK or STOP | OK: Normal communication STOP: Communication stopped |
- |
| Communication RL-Door Motor | Connection status between rear door window regulator assembly (for LH door) and main body ECU (multiplex network body ECU) | OK or STOP | OK: Normal communication STOP: Communication stopped |
- |
| Communication Master SW | Connection status between power window regulator master switch assembly and main body ECU (multiplex network body ECU) | OK or STOP | OK: Normal communication STOP: Communication stopped |
- |
ACTIVE TEST
Tech Tips
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / (desired system) / Active Test.
According to the display on the GTS, perform the Active Test.
CAUTION:
Be careful to avoid injuries as this test causes vehicle parts to move. During the Active Test, the jam protection function will not operate.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Power Window | Power window | OFF / UP / DOWN | - |
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Power Window | Power window | OFF / UP / DOWN | - |
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Power Window | Power window | OFF / UP / DOWN | - |
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Power Window | Power window | OFF / UP / DOWN | - |