ROOF HEADLINING(for Hatchback) DISASSEMBLY

PROCEDURE


  1. REMOVE NO. 1 ROOM LIGHT ASSEMBLY (for Push Switch Type)


    1. A0030E7

      Disconnect the connector.

    2. Disengage the 4 claws to remove the No. 1 room light assembly.

  2. REMOVE VANITY LIGHT ASSEMBLY (w/ Vanity Light)


    1. A003105

      Disconnect the connector.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    2. Disengage the claw and guide to remove the vanity light assembly.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  3. REMOVE NO. 3 ANTENNA CORD SUB-ASSEMBLY

    Click here

  4. REMOVE NO. 4 ROOF SILENCER PAD (for Standard Roof)


    1. A0030H8

      w/ Front Silencer Pad:


      1. Remove the No. 4 roof silencer pad.

  5. REMOVE NO. 3 ROOF SILENCER PAD (for Standard Roof)


    1. A003049

      w/ Front Silencer Pad:


      1. Remove the 2 No. 3 roof silencer pads.

  6. REMOVE NO. 1 ROOF SILENCER PAD (for Standard Roof)


    1. w/ Silencer Pad:

      A00306T

      1. Remove the 4 No. 1 roof silencer pads.

  7. REMOVE NO. 5 ROOF SILENCER PAD (for Standard Roof)


    1. A0030PH

      w/ Silencer Pad:


      1. Remove the No. 5 roof silencer pad.

  8. REMOVE ROOF HEADLINING PAD (for Standard Roof)


    1. A0031A0

      w/ Vanity Light:


      1. Remove the roof headlining pad.

  9. REMOVE NO. 2 ROOF HEADLINING PAD (for Standard Roof)


    1. A002ZU0

      w/ Vanity Light:


      1. Remove the No. 2 roof headlining pad.

  10. REMOVE NO. 1 ROOF WIRE (for Standard Roof)


    1. Remove each adhesive tape from the roof headlining.

      A002ZWRC01
      *A w/o Vanity Light *B w/ Vanity Light
      *C w/ No. 1 Room Light *D for LHD
      *E for RHD *F w/ EC Mirror
      *G w/ Rain Sensor *H w/ Pre-crash Safety System
      *I w/ Pre-Crash Safety City Heater - -
      A00301U Adhesive Tape - -

    2. Remove the No. 1 roof wire from the roof headlining.

  11. REMOVE NO. 1 ROOF WIRE (for Glass Roof)


    1. Remove each adhesive tape from the roof headlining.

      A0030Z1C01
      *A for LHD *B for RHD
      *C w/ EC Mirror *D w/ Rain Sensor
      *E w/ Pre-crash Safety System *F w/ Pre-Crash Safety City Heater
      A00301U Adhesive Tape - -

    2. Disengage each clamp to remove the No. 1 roof wire from the roof headlining.