ROOF HEADLINING(for Wagon) DISASSEMBLY

PROCEDURE


  1. REMOVE NO. 1 ROOM LIGHT ASSEMBLY (for Push Switch Type)

    Click here

  2. REMOVE VANITY LIGHT ASSEMBLY (w/ Vanity Light)

    Click here

  3. REMOVE NO. 3 ANTENNA CORD SUB-ASSEMBLY

    Click here

  4. REMOVE NO. 1 ROOF SILENCER PAD (for Standard Roof)


    1. Remove the 5 No. 1 roof silencer pads.

      A0030R2

  5. REMOVE NO. 2 ROOF SILENCER PAD (for Standard Roof)


    1. A0030S4

      Remove the 2 No. 2 roof silencer pads.

  6. REMOVE CENTER ROOF HEADLINING PAD (for Standard Roof with Vanity Light)


    1. A003085

      Remove the 2 center roof headlining pads.

  7. REMOVE NO. 1 ROOF WIRE (for Standard Roof)


    1. Remove the adhesive tape from the roof headlining.

      A0030VUC01
      *A w/o Vanity Light *B w/ Vanity Light
      *C for LHD *D for RHD
      *E w/ EC Mirror *F w/ Rain Sensor
      *G w/ Pre-crash Safety System *H w/ Pre-Crash Safety City Heater
      A00301U Adhesive Tape - -

    2. Remove the No. 1 roof wire from the roof headlining.

  8. REMOVE NO. 1 ROOF WIRE (for Glass Roof)


    1. Remove the adhesive tape from the roof headlining.

      A00317NC01
      *A for LHD *B for RHD
      *C w/ EC Mirror *D w/ Rain Sensor
      *E w/ Pre-crash Safety System *F w/ Pre-Crash Safety City Heater
      A00301U Adhesive Tape - -

    2. Disengage each clamp to remove the No. 1 roof wire from the roof headlining.