UPPER INSTRUMENT PANEL(for Hatchback, Wagon) REASSEMBLY

PROCEDURE


  1. INSTALL NO. 1 DEFROSTER NOZZLE GARNISH


    1. Install the No. 1 defroster nozzle garnish with the 8 screws <B>.

      A01T8R4

  2. INSTALL NO. 1 SIDE DEFROSTER NOZZLE


    1. A01TAWU

      Engage the 5 claws to install the No. 1 side defroster nozzle.

  3. INSTALL NO. 2 SIDE DEFROSTER NOZZLE

    Tech Tips

    Use the same procedure as for the No. 1 side defroster nozzle.

  4. INSTALL NO. 1 INSTRUMENT PANEL CUSHION


    1. Install a new No. 1 instrument panel cushion as shown in the illustration.

      A01TB0SC01
      *a Marking - -

      Tech Tips

      Install the No. 1 instrument panel cushion so that it is within the standard dimensions shown in the illustration.

      Standard Dimension
      Area Dimension
      A 0 to 10 mm (0 to 0.394 in.)

  5. INSTALL NO. 2 INSTRUMENT PANEL WIRE


    1. A01TBHX

      Engage the 7 clamps to install the No. 2 instrument panel wire.

  6. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)

    Click here

  7. INSTALL NO. 2 INSTRUMENT PANEL CUSHION


    1. Using hot-melt glue, install a new No. 2 instrument panel cushion.

      Tech Tips

      Install the No. 2 instrument panel cushion so that it is within the markings shown in the illustration.

      Standard Dimension
      Area Dimension
      A 30 mm (1.18 in.)
      B 25 mm (0.984 in.)
      A01T8DIC01
      *a Marking *b Hot-melt glue application location

  8. INSTALL INSTRUMENT CLUSTER FINISH PANEL RETAINER


    1. A01T8DL

      Install the instrument cluster finish panel retainer with the 4 screws <B>.

  9. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A01TDK1

      Install the center instrument panel register assembly with the 7 screws <B>.

    2. A01TCQ3

      Connect the connector.

  10. INSTALL AUTOMATIC LIGHT CONTROL SENSOR (w/ Automatic Light Control System)

    Click here

  11. INSTALL COOLER (SOLAR SENSOR) THERMISTOR (for Automatic Air Conditioning System)

    Click here

  12. INSTALL NO. 2 HEATER TO REGISTER DUCT


    1. A01T8FJ

      Install the No. 2 heater to register duct with the 3 screws <B>.

  13. INSTALL NO. 1 HEATER TO REGISTER DUCT


    1. A01TBA6

      Install the No. 1 heater to register duct with the 4 screws <B>.

  14. INSTALL DEFROSTER NOZZLE ASSEMBLY


    1. A01TDQ3

      Engage the 6 guides as shown in the illustration.

    2. A01TCNU

      Install the defroster nozzle assembly with the 3 screws <B>.

  15. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

    Click here