UPPER INSTRUMENT PANEL(for Sedan) REASSEMBLY

PROCEDURE


  1. INSTALL NO. 1 DEFROSTER NOZZLE GARNISH


    1. Install the No. 1 defroster nozzle garnish with the 8 screws <B>.

      A01LXAZ

  2. INSTALL NO. 1 SIDE DEFROSTER NOZZLE


    1. A01M0QH

      Engage the 5 claws to install the No. 1 side defroster nozzle.

  3. INSTALL NO. 2 SIDE DEFROSTER NOZZLE

    Tech Tips

    Use the same procedure as for the No. 1 side defroster nozzle.

  4. INSTALL NO. 1 INSTRUMENT PANEL CUSHION


    1. Install a new No. 1 instrument panel cushion as shown in the illustration.

      A01LXNHC01
      *a Marking - -

      Tech Tips

      Install the No. 1 instrument panel cushion so that it is within the standard dimensions shown in the illustration.

      Standard Dimension
      Area Dimension
      A 0 to 10 mm (0 to 0.394 in.)

  5. INSTALL NO. 2 INSTRUMENT PANEL WIRE


    1. A01M0C4

      Engage the 7 clamps to install the No. 2 instrument panel wire.

  6. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)

    Click here

  7. INSTALL NO. 2 INSTRUMENT PANEL CUSHION


    1. for LHD:


      1. Using hot-melt glue, install a new No. 2 instrument panel cushion.

        A01M1HHC01
        *a Marking *b Hot-melt Glue Application Location

        Tech Tips

        Install the No. 2 instrument panel cushion so that it is within the markings shown in the illustration.

        Standard Dimension
        Area Dimension
        A 35 mm (1.3780 in.)
        B 45 mm (1.7717 in.)
        C 68 mm (2.6772 in.)
        D 35 mm (1.3780 in.)
        E 30 mm (1.1811 in.)
        F 25 mm (0.9843 in.)

    2. for RHD:


      1. Using hot-melt glue, install a new No. 2 instrument panel cushion.

        A01M1C9C01
        *a Marking *b Hot-melt Glue Application Location

        Tech Tips

        Install the No. 2 instrument panel cushion so that it is within the markings shown in the illustration.

        Standard Dimension
        Area Dimension
        A 25 mm (0.9843 in.)
        B 30 mm (1.1811 in.)
        C 50 mm (1.9685 in.)
        D 38 mm (1.4961 in.)
        E 45 mm (1.7717 in.)
        F 35 mm (1.3780 in.)

  8. INSTALL INSTRUMENT CLUSTER FINISH PANEL RETAINER


    1. A01M1II

      Install the instrument cluster finish panel retainer with the 4 screws <B>.

  9. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A01M0OJ

      Install the center instrument panel register assembly with the 7 screws <B>.

    2. A01M1CG

      Connect the connector.

  10. INSTALL AUTOMATIC LIGHT CONTROL SENSOR (w/ Automatic Light Control System)

    Click here

  11. INSTALL COOLER (SOLAR SENSOR) THERMISTOR (for Automatic Air Conditioning System)

    Click here

  12. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

    Click here

  13. INSTALL NO. 2 HEATER TO REGISTER DUCT


    1. A01M17R

      Install the No. 2 heater to register duct with the 3 screws <B>.

  14. INSTALL NO. 1 HEATER TO REGISTER DUCT


    1. A01LWP2

      Install the No. 1 heater to register duct with the 4 screws <B>.

  15. INSTALL DEFROSTER NOZZLE ASSEMBLY


    1. A01M1WS

      Engage the 6 guides as shown in the illustration.

    2. A01M30U

      Install the defroster nozzle assembly with the 3 screws <B>.