FRONT CONSOLE BOX(for Hatchback, Wagon) REMOVAL

PROCEDURE


  1. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

  2. REMOVE FRONT NO. 1 CONSOLE BOX INSERT


    1. A01LY3CC01
      *a Guide <A>
      *b Guide <B>

      Pull the front No. 1 console box insert in the direction indicated by the arrow (1) to disengage the claw, 3 clips and guide <A>.

    2. Pull the front No. 1 console box insert in the direction indicated by the arrow (2) to disengage the guide <B> to remove the front No. 1 console box insert.

  3. REMOVE FRONT NO. 2 CONSOLE BOX INSERT


    1. A01LWMAC03
      *a Guide <A>
      *b Guide <B>

      Pull the front No. 2 console box insert in the direction indicated by the arrow (1) to disengage the claw, 3 clips and guide <A>.

    2. Pull the front No. 2 console box insert in the direction indicated by the arrow (2) to disengage the guide <B> to remove the front No. 2 console box insert.

  4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)


    1. A01LZD8

      Turn the shift lever knob sub-assembly counterclockwise and remove the shift lever knob sub-assembly.

  5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for CVT)


    1. A01LYA0

      Disengage the claw to disconnect the position indicator housing assembly as shown in the illustration.

    2. A01LYDU

      Turn the shift lever knob sub-assembly counterclockwise and remove the shift lever knob sub-assembly.

  6. REMOVE SHIFTING HOLE BEZEL (for Manual Transaxle)


    1. A01LVUO

      Using a moulding remover, disengage the 5 clips and remove the shifting hole bezel.

  7. REMOVE POSITION INDICATOR HOUSING ASSEMBLY (for CVT)


    1. A01LVMC

      Using a moulding remover, disengage the 3 clips as shown in the illustration.

    2. A01LX70

      Disengage the clip as shown in the illustration.

    3. A01LZ6J

      Disengage the clip as shown in the illustration.

    4. Disconnect the connector to remove the position indicator housing assembly.

  8. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A01LYZE

      Disengage the 3 claws and 5 clips and remove the upper console panel sub-assembly.

  9. REMOVE UPPER CONSOLE PANEL


    1. A01LW1F

      Disengage the 6 clips.

    2. Disengage the clamp.

    3. Disconnect each connector to remove the upper console panel.

  10. REMOVE INSTRUMENT PANEL BOX ASSEMBLY


    1. A01M1XA

      Disengage the 4 clips.

    2. Disconnect each connector.

    3. Disengage the clamp to remove the instrument panel box assembly.

  11. REMOVE REAR CONSOLE BOX COVER (w/o Power Outlet Socket)


    1. A01M1ZI

      Remove the rear console box cover.

  12. REMOVE CONSOLE BOX CARPET


    1. A01LWWZ

      Remove the console box carpet.

  13. REMOVE REAR CONSOLE BOX ASSEMBLY


    1. for Manual Transaxle:


      1. A01LW1D

        Remove the 2 bolts and 2 screws.

    2. for CVT:


      1. A01M080

        Remove the 2 bolts and 4 screws.

    3. A01M25P

      Disengage the 4 guides and remove the rear console box assembly as shown in the illustration.