AIR CONDITIONING PANEL(for Automatic Air Conditioning System) REMOVAL

PROCEDURE


  1. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (except Sedan)

    Click here

  2. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (except Sedan)

    Click here

  3. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL (except Sedan)

    Click here

  4. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH (except Sedan)

    Click here

  5. REMOVE INSTRUMENT SIDE PANEL RH (except Sedan)

    Click here

  6. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY (except Sedan)

    Click here

  7. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (except Sedan)

    w/ Radio Receiver:

    Click here

  8. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (except Sedan)


    1. A012GR5

      Disengage the 2 claws and 5 clips.

    2. Disconnect the connector to remove the air conditioning control assembly.

  9. PRECAUTION (for Sedan)

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  10. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for Sedan)

    for LHD with Entry and Start System:

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  11. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Sedan)

    for Manual Transaxle:

    Click here

  12. REMOVE SHIFTING HOLE BEZEL (for Sedan)

    for Manual Transaxle:

    Click here

    for CVT:

    Click here

  13. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (for Sedan)

    Click here

  14. REMOVE UPPER CONSOLE PANEL (for Sedan)

    Click here

  15. REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY (for Sedan)

    Click here

  16. REMOVE NO. 1 INSTRUMENT PANEL REGISTER SUB-ASSEMBLY (for Sedan)

    Click here

  17. REMOVE NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY (for Sedan)

    Click here

  18. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for Sedan)

    Click here

  19. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Sedan)

    Click here

  20. REMOVE NO. 1 SWITCH HOLE BASE (for Sedan)

    for LHD:

    Click here

    for RHD:

    Click here

  21. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for Sedan)


    1. A012HM8

      Disengage the 2 claws and 5 clips.

    2. Disconnect the connector to remove the air conditioning control assembly.