HEATER ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

    Click here

  2. REMOVE WATER GUARD PLATE LH

    for Sedan: Click here

    for Hatchback, Wagon: Click here

  3. REMOVE NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL

    for Sedan: Click here

    for Hatchback, Wagon: Click here

  4. REMOVE OUTER COWL TOP PANEL

    for Sedan: Click here

    for Hatchback, Wagon: Click here

  5. REMOVE FRONT FLOOR COVER RH


    1. B0043P9C01
      B0042CO Bolt
      B0043VS Clip

      Remove the bolt and clip.

    2. Disengage the 3 clips to remove the front floor cover RH.

  6. REMOVE AIR DUCT


    1. B0044C4

      Remove the clip and air duct.

  7. REMOVE NO. 1 EXHAUST PIPE SUB-ASSEMBLY


    1. B0042C5

      Remove the 3 nuts and No. 1 exhaust pipe sub-assembly.

  8. REMOVE NO. 2 HEAT EXCHANGER UNIT GASKET


    1. Remove the No. 2 heat exchanger unit gasket.

  9. REMOVE HEATER AND ACCESSORY ASSEMBLY


    1. B0044O4

      Disconnect the connector.

    2. Using pliers, grip the claws of the clips and slide the 3 clips to disconnect each hose.

    3. Disengage the clamp.

    4. B0042LT

      Remove the 3 nuts and heater and accessory assembly.