HEATER FUEL PUMP INSTALLATION

PROCEDURE

1. INSTALL HEATER PUMP ASSEMBLY

   
   

   1. Install the heater pump assembly with the nut.

      

      *a

      Marking (Blue)

      *b

      Marking (Orange)

      Torque:

      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

   2. Align the markings on each hose and pipe as shown in the illustration and connect them with the clips.

   3. Connect the connector.

2. INSTALL OUTER COWL TOP PANEL

   Click here

3. INSTALL DIFFERENTIAL PRESSURE SENSOR ASSEMBLY (for 1AD-FTV)

   Click here

4. INSTALL NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL

   Click here

5. INSTALL WATER GUARD PLATE LH

   Click here

6. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

   Click here