AIR CONDITIONING PRESSURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL AIR CONDITIONER PRESSURE SENSOR


    1. Remove the vinyl tape from the air conditioner tube assembly and the connecting part of the air conditioner pressure sensor.

    2. Apply sufficient compressor oil to a new air conditioner pressure sensor and the connecting surface.

      Compressor Oil
      ND-OIL 8 or equivalent
    3. A01M321C01
      *a Turn
      *b Hold

      Using a 27 mm deep socket wrench, install the air conditioner pressure sensor.

      Torque:
      10.8 N*m  { 110 kgf*cm, 8 ft.*lbf }

    4. Connect the connector.

  2. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT

    Click here

  3. WARM UP ENGINE

    Click here

  4. INSPECT FOR REFRIGERANT LEAK

    Click here