PROCEDURE
INSTALL AIR CONDITIONING CONTROL ASSEMBLY (except Sedan)
Connect the connector.
Engage the 2 claws and 5 clips to install the air conditioning control assembly.
INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (except Sedan)
w/ Radio Receiver:
INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY (except Sedan)
INSTALL INSTRUMENT SIDE PANEL RH (except Sedan)
INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH (except Sedan)
INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL (except Sedan)
INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (except Sedan)
INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (except Sedan)
INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Sedan)
Connect the connector.
Engage the 2 claws and 5 clips to install the air conditioning control assembly.
INSTALL NO. 1 SWITCH HOLE BASE (for Sedan)
for LHD:
for RHD:
INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Sedan)
INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for Sedan)
INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY (for Sedan)
INSTALL NO. 1 INSTRUMENT PANEL REGISTER SUB-ASSEMBLY (for Sedan)
INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY (for Sedan)
INSTALL UPPER CONSOLE PANEL (for Sedan)
INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (for Sedan)
INSTALL SHIFTING HOLE BEZEL (for Sedan)
for Manual Transaxle:
for CVT:
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Sedan)
for Manual Transaxle:
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for Sedan)
for LHD with Entry and Start System:
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.